Applying Your New Decal!

Applying Your New Decal!

First thing first, THANK YOU! Thank you for ordering from me. You are supporting not only a business but a dream as well. (That is totally cool!) The day has finally come and your awesome decal is in your hands. Before you rush to apply it to any surface, please read the following tips.

Car decals should be applied only to surfaces with temperatures between 50 to 90 degrees Fahrenheit and should be allowed to cure for 24 hours before getting wet.

Your decal comes with transfer tape applied to help you easily install it. (It’s the clear sticker sheet that is over top. Make sure you remove the clear when it is finally applied to your desired surface.)

What you will need:
– Decal
– Isopropyl (rubbing) alcohol
– Cotton balls
Vinyl applicator or old credit card

Step 1) Clean the surface where you will apply the decal with rubbing alcohol and a cotton ball. Allow it to air dry.

Step 2) Beginning in a corner, peel the backing paper off of the transfer tape.

Step 3) Place one side of the transfer tape onto the surface, and press it down with the vinyl applicator.

Step 4) Continue applying the decal in a rolling motion using the vinyl applicator to press it down as you go.

Step 5) Once the decal is placed, use the vinyl applicator and rub it firmly from the center point to the edges in all directions to remove air bubbles.

Step 6) Beginning in a corner, slowly peel away the transfer tape at a 45 degree angle. Enjoy your decal!

Leave a Reply